Asansam ver 1.8.3 Released HOT UPDATE
Add BOOT REPAIR
============
Samsung Galaxy S III I9300 repair dead boot
Add RESET PATTERN
=============
Samsung Galaxy S III I9300 (FIRST IN WORLD)
Add REMOVE AND RESET USER CODE
========================
Samsung Galaxy S III I9300 (FIRST IN WORLD)
I9300 repair boot manual
=================
-Insert External SD Card to normal phone to copy
Bootloader to SD card
-Open asansam tool
-Select model and press run
-Press boot repair button
-Click Open bootfile button and load GT-I9300_Boot_Recovery.tar file
-Enter download mode with the normal phone(SD Card inserted)
-Connect the phone to PC, using USB cable
-Click Write boot file button to copy bootloader to the phone
-Disconnect the phone from PC
-Press exit and press on boot repair button again
-Click Open boot file button and load GT-I9300_Boot_Recovery.tar file
-check send to sdcard option to copy bootloader to SD Card
-Enter download mode with the normal phone(bootloader was copied before), and connect it to PC again
-Click Write boot file button to copy bootloader to the SD Card
-After downloading turn off the phone and remove the SD Card
(This SD card will be used to recover boot of the phone)
-Disassemble the ‘No Power’ phone, but connecting the LCD with PBA, to check the LCD if boot recovery is successfully done
-Insert SD card(bootloader was copied) to the PBA
-Connect the PBA with usb cable and power supply,
with the POWER OFF
-Short R313 resistance(HQ uses tweezers to short the resistance)
-Turn on the PBA, and REMOVE THE SHORT between 3 to 6 seconds from turning on the PBA
-After approximately 5 seconds, you can see message on the LCD boot recovery was succeeded
-Turn off the pba, and remove SD Card
-Assemble the phone, and enter download mode
-Download Full S/W including PIT, PDA, CSC and PHONE
DOWNLOAD LINK
Br
Nonoyxp
